The depth of this substance is 4 mm.
If you want, you can boost the amount of the structure to 6 yards or longer. To try it, it’s enough to attach a two-meter extension. When choosing a drawing, look closely at the distance between the arches. This figure needs to be 65 cm, which is the most appropriate length for the specified depth of this substance. The width of the doors based on the manufacturer’s drawing is 90 cm.
Before building a polycarbonate greenhouse, it’s important to pick a place because of the place. If that is done correctly, you can provide yourself with a crop of fresh veggies for the entire year.
The location for the future greenhouse is marked instantly in the planning of this garden plot. So as to melt the snow at the place of the greenhouse as soon as possible, the ideal point on the website will be a small elevation. Furthermore, in such a place won’t have to be concerned about large humidity as dirt and atmosphere inside the structure.
Assemble a polycarbonate greenhouse in a raised site – means to look after the best temperatures indoors.
If it is not possible to place a greenhouse in an elevated position, you’ll have to pour a coating of fine crushed stone around 20 cm and the same layer of fertile land to make seedbeds.
Before assembling a greenhouse in your backyard plot, you should also think about where and how gidpostroy.ru this construction is going to be set up. First, you must choose a place for this. The greenhouse ought to be found in a metropolitan region at least a couple meters away from houses, barns and other structures.
The best way to Put in a greenhouse in Line with the sides of the Planet
Make sure you level the dirt surface – it’s ideal to even remove the surface. This can also get rid of weed seeds. And for ease of work, remove the dirt in an area that’s going to a meter wider on both sides of the rectangle you desire.
It’s also worth thinking about having a foundation. As manufacturers say, today most greenhouses don’t need it, especially if they (greenhouses) are utilized only in the spring and summer time. But, experienced gardeners still suggest earning an elementary basis from a bar. It’s extremely simple – it is enough to connect with each other using metal corners and screws four parts of wood with a cross-section of at least 10 * 10 cm. The size of such a base should be equal to the base of their upcoming greenhouse.
Simple bar foundation
You might even produce a strip base of concrete. He is more reliable than a bar base, but demands greater financial and labour costs. Incidentally, the greenhouse, that will be used in the winter, without it and don’t do without it whatsoever.
Stages of the creation of a strip foundation: a schematic representation
Many manufacturers counsel to install greenhouse structures without even building a base. Even for this purpose, they equip the frame with special T-shaped legs, so that the construction was securely fixed. But, as practice shows, it’s still necessary to construct a base: so and the basis will be more firmly fixed and also the elements of the basis in touch with the soil, will be kept much more in its initial condition.
The main issue is to deal with the material with specific agents to protect the wood from moisture. The material is installed on concrete blocks that are dug into the ground. For a six-meter structure, they want 10 bits: four to each side and one at the center of the ends.
Before you perform the greenhouse , you need to choose the right spot for this. It has to be an even site, so that the frame was located equally, without distortions. It should be sunny and not obscured by buildings or trees.